Ethernet refers to the format used to assign addresses from LAN address. The
address must be used for any MAC with the first part of the address
that is performed to identify the company, the card and the second part
of the code identify the card only. This differs from another network interface card or a card with the self. The code that identifies the manufacturer called the organizationally unique identifier (OUI).
With Ethernet, it is also possible, addresses of groups that are used to identify multiple network interfaces. Include such directions;
Broadcast addresses
The LAN devices, need to process the frame. Its value is FFFF FFFF FFFF.
Multicast addresses
They are directions to be able to communicate a subset of devices. Follow the following format 0200.5 - is used with any value in the last part of the address.
How to find the Ethernet address in your computer?
The ideal address computer Ethernet albums is easy, but if a problem, call an expert to give you help find it. You
can start by checking the printed label which is applied usually on the
bottom of your laptop or on the back of the computer.
For Windows computers is still the same by clicking on the start menu, run von Wahl and enter CMD and press. What to do then, is to give the IP configuration that is shown in the window, type command prompt, and then press or OK. While he was in the command prompt window, it is possible to find the adapter Ethernet LAN. The address is normally 12-digit and see Ethernet LAN adapter.
Determine the Ethernet address of the machine
If you have a printer or a computer, it is easy to determine the Ethernet address. What
the manufacturer which is the Ethernet interface, to ensure that each
machine has a unique Ethernet, which are only connected to the computer
can.? Each machine has written its Ethernet, so it will be easier to settle. The address has twelve hexadecimal digits, which uses whole numbers 0-9 and also uses the alphabetic letters F the. In the majority of cases, six pairs (numbers and letters) that make up the Ethernet address usually are separated by hyphens. For example, we have the 07-06-A3-B6-faith. This is what makes it easier for one to distinguish the Ethernet address of other numbers. In some cases, two points can be used to separate the pairs. In this case, you can remove the zeros. It could, for example, the number of 8:0: A6: B4 are written: FC or would have something like this 0: 0:86: AB: 0f: cc. If you decide to zero to the left, "00" is "0", and this is what helps to eliminate six pairs.
